It is a kind of new development tendency to apply dynamic mechanical analysis ( DMA) to the assessment of different mechanical properties of polymer composite. 将动态力学分析(DMA)应用于聚合物复合材料各种力学性能的评估,是一种新的发展动向。
Mechanical Analysis of Work Roller's Surface Stress and Wear Failure on Cold Rolling 冷轧工作辊表面应力及磨损失效的力学分析
The recursion formula for calculating WOB are established by means of the mechanical analysis. 通过力学分析,推导出计算钻压的迭代公式,即建立了计算井底钻压的力学模型。
The electrical analysis and mechanical analysis on structure of insulator for ITER magnetic systems are made by finite element method. 用有限元法对ITER装置磁体系统的高性能氦气密复合材料绝缘子的结构设计进行电场分析和力学性能分析。
By summing up the mechanical analysis on bearing board into a flexibility problem, the formula of the relationship between flexibility and thickness was deduced by theoretical calculation. 将支撑板的力学分析归结为边界简支的圆形薄板的小挠度问题,通过理论计算得到了支撑板的挠度和厚度的计算关系式,为设计支撑板提供了理论依据。
Mechanical Analysis and Numerical Simulation of Shear Wall Cylinder Structure's Blasting Demolition 剪力墙筒体结构爆破拆除的力学分析和数值模拟
Evaluation Investigation on High-temperature Properties of Epoxy Resin Matrix and its'Composites by Dynamic Mechanical Analysis 动态力学分析法用于评价环氧树脂基体与复合材料耐热性的研究
This stadium in structural design is a bold attempt, and reflected a kind from materials and structure of the mechanical analysis of unification consideration building processing, the design method. 这座体育场在结构设计上是一种大胆的尝试,而且体现了一种从材料和结构的力学分析出发,统一考虑建筑处理的设计方法。
The journal welcomes particularly innovative researches on mechanical analysis and large-scale engineering experiment. 特别欢迎具有创新水平的力学分析及大型工程实验研究。
Mechanical Analysis and Control of Maglev System 新型磁悬浮运动平台力学分析与控制
Design and Mechanical Analysis of Three Links Constant Hangers 三连杆恒力弹簧吊架的设计与力学分析
Mechanical analysis and control research on temperature cracking of raft foundation concrete 筏板基础混凝土温度裂缝的力学分析与控制研究
Mechanical Analysis of Wheel-Soil Interaction for Lunar Rover and Design a Test-Bed 月球车车轮与土壤作用的力学特性分析与测试系统设计
Mechanical analysis and computation have been developed on the parallel springs to improve guiding precision. 为了提高平行簧片机构的导向精度,对平行簧片机构进行了力学分析和计算。
Based on mechanical analysis on rheological characteristics of MR damper, a novel MR damper with helix slotted plunger is developed. 该文基于对MR阻尼器流变特性的力学分析,研制了一种活塞表面刻有螺旋凹槽的新型MR阻尼器。
Engineering application and mechanical analysis on steel tube compound soil-nailing wall support in deep foundation pit 深基坑钢管复合土钉墙支护的工程应用与力学机理分析
The Mechanical Analysis of Stacker Based on ANSYS 基于ANSYS的堆垛机结构力学分析
A Mechanical Analysis of the Role of Exchange Rate Reform in International Trade 改革中汇率对国际贸易作用的机理分析
This paper introduced the structure characteristic and mechanical analysis, the experimental test of sample confirms feasibility of the design. 本文将对大口径反射镜支承的结构特点和力学分析及试验进行介绍。
Mechanical Analysis of Pressing Assembly Based on Finite Element Analysis 基于有限元方法的压合装配力学研究
It mainly discussed the applications of thermal mechanical analysis and micro-thermal analysis. 它主要包括热机械方法和微区热分析法。
The storage modulus and damping factor of composites were also characterized through dynamic mechanical analysis ( DMA). 此外,采用动态力学分析(DMA)进一步表征了复合材料的储能模量和阻尼因子。
The mechanical analysis and structural design of big punch sketch plate roof 大开洞异形板屋盖的力学分析与结构设计
On the mechanical analysis of cracks on side walls in open-cut metro station and its control measures 明挖地铁车站侧墙裂缝机理分析和控制措施
A Three-Dimensional Cell Model Based on Finite Element Method and Its Mechanical Analysis 基于有限元方法的三维细胞模型与力学分析
Through a mechanical analysis of the dendritic arm and the crystal on the mould wall, a condition of crystal detachment has been proposed in this paper. 通过对型臂晶体及枝晶臂的力学分析,提出了晶体游离的条件,进而研究了各种游离模型的适用范围。
Mechanical Analysis on Strain Based Design of Buried Pipeline Subject to Impact Load 冲击荷载作用下埋地管道基于应变的力学分析
The mechanical analysis and application of assembly mechanism in bimetal coin 双金属复合币装配机理力学分析与应用
The studies on the mechanical analysis of shed-tunnel structure have been less reported domestically and abroad so far. 目前国内外对棚洞结构的动力分析还鲜见报道。
The dynamic model focuses on the mechanical analysis of the swash plate and the shaft, analyzing the power loss. 动力学模型分析了活塞、斜盘和主轴的受力,计算了摩擦功耗,分析了斜盘腔压力对排量的控制。